★★★★★5.0 on Google ReviewsAuthorised Rational dealerDelivery to the Netherlands, Belgium and Germany
Knowledge base/ Ice machines

Hoshizaki KM series:
crescent ice explained

Next to the better-known IM series with solid cube ice, the KM series is the second big ice machine family from Hoshizaki. What makes crescent ice different, which venues is it the better choice for, and which KM model matches your daily demand?

By Jos Menting, JMGT Commercial Kitchen Equipment · Official Hoshizaki Dealer · Published 16 November 2026

In short

Crescent ice is hard, clear ice that freezes together less and fills a glass or ice well compactly. Choose the Hoshizaki KM series for general drinks service, bottle cooling and buffets; choose the IM series when cocktails and spirits on the rocks are the focus. Up to about 40 kg per day the KM-40B is enough (from EUR 1,310 excl. VAT from stock at JMGT); above that you move via the KM-60C-HC and KM-80C-HC to the KM-140C-HC.

What exactly is crescent ice?

A KM machine runs water over a vertical, double-sided stainless steel evaporator. The ice builds up layer by layer from the inside out, so air and dissolved minerals are largely washed away. The result is a clear, hard piece with one flat and one rounded side. According to Hoshizaki the core temperature is around -4 degrees Celsius, which makes the ice firmer.

The shape has two practical benefits. Crescent pieces stack compactly in a glass, so you need less ice for a well-filled glass. And they are less likely to freeze into a block in the bin or in an ice well with bottles. Hoshizaki also describes the evaporator as resistant to descaling acids.

For all ice types side by side, including flake and nugget ice, see ice types in hospitality.

KM or IM: which series suits your venue?

FeatureKM: crescent iceIM: cube ice
ShapeHalf moon: one flat and one rounded sideSolid cube
MeltingHard and clear, melts evenlyMelts slowest thanks to its large volume
In the bin or ice wellClumps little, easy to scoopEasy to scoop, slightly coarser stacking
Best forGeneral drinks service, bottle cooling, buffetsSoft drinks, water, cocktails, on the rocks

If your bar revolves around cocktails, the solid cube wins: see ice machine for a cocktail bar. Torn between two similarly sized models? Compare the IM-45NE-HC with the KM-40B below.

The KM models compared

Output figures are manufacturer data under favourable conditions. In a warm bar real output is lower: according to Hoshizaki the KM-40B drops from 43 kg to 33 kg per day at an ambient temperature of 32 degrees.

ModelOutput/24 hStorageRefrigerantFor whom
KM-40Bup to 43 kg16 kgR134aSmall cafe, bistro, under-counter bar
KM-60C-HCapprox. 60 kgapprox. 23 kgR290Restaurant or cafe with steady drinks service
KM-80C-HCapprox. 75 kgapprox. 34 kgR290Busy restaurant, bar with terrace
KM-140C-HCup to 138 kg55 kgR290Hotel, large bar, event venue
Modular (KMD / KM + bin)from approx. 200 kgseparate binper modelCatering, events, care

Need more than about 140 kg per day? A modular machine on a separate storage bin is usually smarter than the largest compact model: you can then size production and storage independently.

Not sure about your daily demand yet? Work it out with the capacity calculation guide or read ice machine for a cafe, restaurant or hotel.

Installing and maintaining a KM machine

Front ventilation. The compact KM models draw in and exhaust air at the front, so they can be built in under a counter as long as the front stays clear.

Keep the air filter clean. The air filter sits at the front and can be removed and rinsed by your own staff. Hoshizaki states that this extends machine life and prevents call-outs.

Descaling. Scale on the evaporator slows the release of the ice and reduces output. How often and how, see descaling a Hoshizaki ice machine.

From practice

When we install ice machines we see the same pattern again and again. Venues that use ice mainly in ice wells on the bar and for bottle cooling are better off with crescent ice: it stays looser and less is lost to pieces that have frozen together. Venues with a cocktail menu almost always choose cube ice, because the guest sees the difference in the glass.

The most common question after the first summer: the machine makes less ice than promised. In most cases it has been built in with too little air space at the front, or the air filter is clogged with kitchen grease and dust. That is why we check the location for drainage, ventilation and ambient temperature beforehand, and show at handover how the filter comes out.

Frequently asked questions

What is crescent ice?

Crescent ice has one flat and one rounded side, like a half moon. Hoshizaki makes it in the KM series on a vertical stainless steel evaporator: the ice builds up from the inside out, which makes it clear and hard. Thanks to the shape, the pieces are less likely to freeze together in the storage bin or ice well.

What is the difference between the Hoshizaki KM and IM series?

The IM series makes solid cube ice that melts slowly and works best in glasses with soft drinks, water and cocktails. The KM series makes crescent ice: more compact, fills a glass or ice well well and clumps less. For general drinks service and bottle cooling we often recommend KM, for cocktails and spirits on the rocks often IM.

Which KM model do I need?

Up to about 40 kg of ice per day the KM-40B is enough. Between 50 and 75 kg look at the KM-60C-HC or KM-80C-HC. Around 130 kg per day the KM-140C-HC is the logical step. Above that, combine a modular KM machine with a separate storage bin. Always calculate for your peak day.

What does a Hoshizaki KM ice machine cost?

JMGT supplies the KM-40B from stock from EUR 1,310 excl. VAT. The larger KM models are quoted on request, depending on version and availability.

Next step

Unsure between crescent and cube ice, or between two sizes? Tell us your venue type and peak numbers and we will recommend the right Hoshizaki model.

Keep exploring

Browse the matching range